Calantha Bloom Ceiling Fan Light
Calantha Bloom Ceiling Fan Light
Couldn't load pickup availability
The Calantha Bloom Ceiling Fan Light brings a playful charm to your interiors with its scalloped, multi-tone glass lampshades—reminiscent of blooming petals at dusk. Paired with deep wood-finish blades and a matte black fixture, it balances vintage elegance with a splash of personality. Ideal for eclectic bedrooms, cozy nooks, or spaces that crave warmth and character.
Planning to use a wall switch? To ensure the best performance, this fan light pairs exclusively with our Wireless Wall Switch. Standard home switches are not compatible with this model's receiver. If you prefer wall control over a handheld remote, please remember to purchase the Wireless Wall Switch directly from our website.
Please note: All of our fan lights are equipped with DC motors.
Notes*: The fan light has a downrod version. If you need to install it on a sloped ceiling, please contact customer service for compatible accessories.
Installation Notes: When installing the leaves, be sure to add gaskets to fix them, otherwise the motor copper wire will be damaged.
Friendly Reminder
- This fan light cannot be installed on a ceiling with joists + gypsum board or wood panels (may cause noise and wobbling issues).
- This fan light cannot be installed on prefabricated ceilings (installation on cement concrete and solid wood beams is acceptable).
- If the installation surface has round or square grooves, please inform customer service of the groove's diameter and depth.
- Sloped ceilings cannot be installed; the beam width should be at least 6 cm and the ceiling must support over 20 kg.
Scalloped glass shades
Multi-tone glass lampshades in White, Amber or Orange, like blooming petals at dusk.
Wood blades, DC motor
Deep wood-finish blades on a quiet DC motor with 6-speed control.
Remote control
Handheld remote included; add our Wireless Wall Switch for wall control.
| Model | Size |
|---|---|
| Model A 3-lights | Dia 107cm x H 30cm / ∅ 42″ x H 11.8″ |
| Model B 3-lights | Dia 107cm x H 30cm / ∅ 42″ x H 11.8″ |
| Model C 3-lights | Dia 107cm x H 30cm / ∅ 42″ x H 11.8″ |
| Model D 3-lights | Dia 107cm x H 30cm / ∅ 42″ x H 11.8″ |
| Model E 3-lights | Dia 107cm x H 30cm / ∅ 42″ x H 11.8″ |
| Model F 3-lights | Dia 107cm x H 30cm / ∅ 42″ x H 11.8″ |
🔍 Click any diagram to enlarge
| Materials | Metal frame, Wooden blades, glass shade, pure copper motor. |
| Light source | LED bulb or Edison bulb. |
| Light source base type | . |
| Power | 35W variable frequency. |
| Fan speed | 6-speed control. |
| Voltage | AC 110-240V, 60Hz. |
| Mounting | Ceiling |
| Finishes | Brown, Black, Walnut Wood. |
| Lampshade Finishes | White, Amber, Orange. |
| Wiring | Hardwired. |
| Control method | Handheld Remote. |
| Certifications | CE (EU) · SAA/RCM (Australia & NZ) · CSA (Canada) · FCC tested (US) — |
Sizing & questions
Here is what most clients ask before choosing theirs.
Can I control the Calantha Bloom with a wall switch?
It comes with a handheld remote. For wall control, this fan light pairs exclusively with our Wireless Wall Switch, sold separately on our website; standard home switches are not compatible with this model's receiver.
What kind of motor does it have, and how many speeds?
All of our fan lights are equipped with DC motors; this one uses a pure copper motor rated at 35W variable frequency, with 6-speed control, on AC 110-240V, 60Hz.
Which ceilings can it be installed on?
It can be installed on cement concrete and solid wood beams. It cannot be installed on joists with gypsum board or wood panels (which may cause noise and wobbling) or on prefabricated ceilings. The beam should be at least 6 cm wide and the ceiling must support over 20 kg. If the surface has round or square grooves, tell customer service the groove's diameter and depth.
What models, colors and bulbs are available?
Models A to F are all 3-lights, Dia 107cm x H 30cm / ∅ 42″ x H 11.8″. The scalloped multi-tone glass lampshades come in White, Amber or Orange, with Brown, Black or Walnut Wood finishes, and each light takes an LED or Edison bulb with an E26 or E27 base.
What should I know when installing the blades?
When installing the blades, be sure to add gaskets to fix them, otherwise the motor copper wire will be damaged. The fan light is hardwired; see the installation note image on this page and the Installation Guide in Download Support.
Dia 107cm x H 30cm / ∅ 42″ x H 11.8″
