Skip to product information
1 of 13

Flora Pleated Fabric Semi-Flush Mount

Flora Pleated Fabric Semi-Flush Mount

Regular price $335.00 USD
Regular price $550.00 USD Sale price $335.00 USD
Sale Sold out
Shipping calculated at checkout.
Size
Color
Quantity

Flora Pleated Fabric Semi-Flush Mount — Scalloped Shade, Metal Base, 3 Sizes

A scalloped fabric shade — pleated in vertical panels that gather into a petal-like silhouette — mounts close to the ceiling on a metal base with a dark brown finish. The beige fabric diffuses E26 or E27 bulb light upward and outward, spreading ambient light across the ceiling rather than casting a direct downward beam. Available in three diameters (40, 50, and 60 cm / 15.7, 19.7, and 23.6 inches), the Flora works as a semi-flush ceiling light in bedrooms, dining rooms, and living rooms where clearance between ceiling and fixture matters.


Pleated Fabric Shade

Vertical pleats gather into a scalloped petal outline; diffuses light through the fabric wall.

Semi-Flush Mount

Sits close to the ceiling — suitable for rooms with 8–9 ft ceilings where pendant drop isn't ideal.

Metal Base

Dark brown-finished metal canopy and bottom finial; no painted plastic components.

3 Sizes Available

Ø40 × H23 / Ø50 × H29 / Ø60 × H34 cm — select by room size and ceiling clearance requirement.

E26 or E27 Socket

Standard E26 or E27 base; accepts a wide range of bulb shapes. Bulb not included.

Upward + Ambient Light

Fabric walls diffuse light in all directions; no harsh downward-only beam from this fixture.

About the Fabric Shade

The pleated fabric panels are hand-stitched onto the frame. Minor variation in pleat spacing and shade roundness is normal for this construction method. Do not use steam or an iron directly on the fabric — a soft brush or compressed air removes dust without distorting the pleats.


Size Diameter Height Recommended Room
Small Ø40 cm / 15.7 in H 23 cm / 9.1 in Bedroom, home office, hallway (up to ~120 sq ft)
Medium Ø50 cm / 19.7 in H 29 cm / 11.4 in Master bedroom, dining room (120–200 sq ft)
Large Ø60 cm / 23.6 in H 34 cm / 13.4 in Living room, open dining area (200–300 sq ft)
Ø40 cm / 15.7″H 23 cm / 9.1″
Ø50 cm / 19.7″H 29 cm / 11.4″
Ø60 cm / 23.6″H 34 cm / 13.4″

🔍 Tap any image to enlarge

Choosing a Size

A common guideline: add the room's length and width in feet, and the result in inches is a reasonable shade diameter. For example, a 12 × 14 ft bedroom (26 ft total) suggests a 24–26-inch / 60–65 cm shade as a ceiling fixture.

E26 or E27 · 1 bulb · Bulb not included

Standard E26 or E27 medium base. The fabric shade fully encloses the bulb, so bulb shape is not visible from below. A round or globe-form bulb fits the interior geometry cleanly.


Product Type Semi-Flush Mount Ceiling Light
Available Sizes Ø40 × H23 cm / 15.7 × 9.1 in · Ø50 × H29 cm / 19.7 × 11.4 in · Ø60 × H34 cm / 23.6 × 13.4 in
Shade Material Pleated fabric (beige)
Base / Canopy Metal, dark brown finish
Color Beige shade / dark brown metal base (as shown)
Socket E26 or E27 × 1
Bulb Not included
Wiring Hardwired
Voltage AC 110–240V
Use Indoor, dry locations only
Certification Compatible with North America, Europe, Saudi Arabia, Australia

  • Hardwired ceiling installation — a licensed electrician is recommended.
  • Compatible with standard wall switch (not included). Dimming possible with a dimmable E26 or E27 LED bulb and compatible wall dimmer; no built-in dimmer on this fixture.
  • E26 or E27 socket — twist-lock bulb replacement, no tools required. Bulb not included.
  • For indoor, dry locations only. Not suitable for bathrooms or damp areas.
  • Sloped ceiling compatibility depends on canopy hardware; contact us before ordering if your ceiling pitch exceeds 15°.

How much clearance does this fixture need below the ceiling?
As a semi-flush mount, the fixture sits close to the ceiling — the metal canopy mounts flush and the shade hangs directly below it. Shade height is 23 cm / 9.1 in (Ø40), 29 cm / 11.4 in (Ø50), or 34 cm / 13.4 in (Ø60), so the total projection below the ceiling stays under about 14 inches. It works on standard 8-foot ceilings without the fixture feeling too low.
Which size should I pick for my bedroom or dining room?
For a typical 10 × 12 ft bedroom, the Ø50 cm (19.7 in) is a comfortable fit — large enough to fill the visual center of the ceiling without feeling oversized. For a dining table up to 48 inches wide, the Ø60 cm works well centered above the table. The Ø40 cm suits smaller spaces like home offices, hallways, or walk-in closets.
Can I use a dimmable bulb with this fixture?
Yes — the fixture has a standard E26 or E27 socket and no built-in circuitry that would block dimming. Install a dimmable E26 or E27 LED bulb and pair it with a compatible wall dimmer switch (Triac or leading-edge dimmer rated for LED). The dimmer switch is not included.
How do I clean the pleated fabric shade?
Use a soft dry brush or low-pressure compressed air along the pleats to remove dust. Do not use water, damp cloths, or steam — moisture can cause the fabric to shrink or lose its pleat definition. The metal base can be wiped with a dry cloth.
Is the Flora certified for use in North America and Europe?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.

Sizing & questions

Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.

What ceiling height does this fixture work with?+

The Flora semi-flush mount sits close to the ceiling—ideal for rooms with 8–9 ft ceilings. As a semi-flush design, it requires minimal clearance between the canopy and ceiling, making it suitable where pendant drop isn't practical.

Which size should I choose for my room?+

Add your room's length and width in feet; the total in inches suggests a good shade diameter. Ø40 cm / 15.7″ × H 23 cm / 9.1″ for bedrooms up to ~120 sq ft; Ø50 cm / 19.7″ × H 29 cm / 11.4″ for 120–200 sq ft; Ø60 cm / 23.6″ × H 34 cm / 13.4″ for 200–300 sq ft living areas.

Can this fixture be customized or made to order?+

The Flora is hand-built in our AoYinLight atelier as a made-to-order piece. Contact us about custom sizing or other modifications beyond the three standard diameters.

View full details