Torvan Micro-Cement Outdoor Wall Sconce
Torvan Micro-Cement Outdoor Wall Sconce
Couldn't load pickup availability
The Torvan Micro-Cement Outdoor Wall Sconce sets a solid cube head at the top of a tall, slim wall plate. A recessed LED behind a glass lens in the underside of the cube casts warm light straight down, washing the plate and wall below with a soft, focused glow. Hand-finished micro-cement with a fine sandstone texture gives it the block-built presence of carved stone. Rated IP65 for porches, entrances, patios, and garden walls — and equally at home in a hallway or stairwell — it comes in white or black.
Through-colored micro-cement, hand-finished
The color comes from the cement and sand themselves, not from paint, so there is no coating to peel. White is white cement with light sand; Black is grey cement with dark sand. Each piece is finished by hand, so speckle and tone vary slightly — part of the material, not a defect.
Cube head on a wall plate
A solid micro-cement cube sits on a tall, slim plate.
IP65 weatherproof
Protected against dust and rain for porches, entrances, and garden walls.
Focused downlight
7W · 560 lm warm LED behind a glass lens washes the plate and wall below.
White
White cement with light sand — a pale stone for stucco, plaster, and limestone walls.
Black
Grey cement with dark sand — a speckled charcoal for pale walls, concrete, and brick.
| Size | W 4.7″ x H 13″ x Projection 4.7″ / W 12cm x H 33cm x Projection 12cm |
| Weight | 4.4 lb / 2 kg |
Projection is the depth from the wall at the cube head. Mount one each side of a door, or space several along a wall or staircase.
Click to enlarge
| Materials | Through-colored micro-cement, glass lens |
| Body Finish | White or Black micro-cement |
| Shade Finish | Glass lens under the cube head |
| Size | W 4.7″ x H 13″ x Projection 4.7″ / W 12cm x H 33cm x Projection 12cm |
| Light Source | Integrated LED · Warm Light (3000K) |
| Power | 7W · 560 lm |
| Voltage | AC 100–240V |
| Control | Wall switch |
| Installation | Hardwired wall mount |
| Environment | IP65 · Indoor and outdoor |
| Certifications | CE (EU) · SAA/RCM (Australia & NZ) · CSA (Canada) · FCC tested (US) — |
- Turn off power at the breaker before installing — a licensed electrician is recommended.
- Mount with the cube head at the top so the light falls downward.
- Outdoors, seal all wiring connections in a weatherproof junction box.
- Wipe with a soft, damp cloth; avoid harsh chemicals and pressure washers.
- The LED is built in, so there is no bulb to change.
Can I use it outdoors in the rain?
Yes — it is rated IP65, protected against dust and rain, for porches, front entrances, patios, balconies, and garden walls.
How big is it?
W 4.7″ x H 13″ x Projection 4.7″ / W 12cm x H 33cm x Projection 12cm, and it weighs 4.4 lb / 2 kg.
How bright is it?
A 7W integrated LED (560 lm) in Warm Light (3000K), casting focused light downward through a glass lens.
Does the light shine up or down?
Down. The LED sits behind a glass lens under the cube head and lights the wall plate and ground below, keeping the light source out of direct view.
Will the color peel?
No — the color runs through the material: White is white cement with light sand, Black is grey cement with dark sand. There is no painted coating to peel.
Will it look exactly like the photos?
Each piece is hand-finished, so the speckle and tone vary slightly — part of the material, not a defect.
